^тип MT/CNC

Pre-mounting table:

• Table 3m*1,5m, height same as exit corner cleaner
• Operation : sash arrives with the labels coming from the  machining centre, the operator scans the sash and all the  specifications are represented in figures and per piece on the  screen
• Mounting of hardware + these to be cut, metal scissors –  crémone (espanjolet)
• A length stop is positioned automatic for cutting the hardware
• Only clips hardware is valid to work with an MT/CNC
• There is a rack for hardware storage on top of the pre-mounting table
• Equiped with screen, keyboard, pc, bar code reader, manual screw machine on fixed on balance

Table fixation automatic hardware:

• To place left or right
• The sashe is placed manual on the table
• The cycle is started with bi-manual control
• The clamping passes automatic
• The screw machine fixes all the hardware automatic with data including the pivot OB, with 2 different lengths of screws (one for the hardware, one for the pivot)
• When the middle-pivot is pre-drilled in the centre, the fixation passes also automatic
• 2 sorts of screws and 2 automatic loaders
• The cycle necessary to fix the hardware for f.ex. an OB 800mm*1000mm, in less than 1 minute (depends on mark and kind of hardware)
• Dimensions minimum : window opening 180mm*180mm, dimensions maximum outside 1400*2400 mm
• Output table to evacuate the finished sliding window, 3000mm*1500mm
• Possibility to place the finished sliding window automatic on the output table
• The automatic cycle is protected by a light barrier